Steps to make telnet in Windows/Linux/MAC
You can make a Telnet by following the below mentioned steps:
===============
Open a command prompt in Windows:
1. Click Start > Run.
2. Type cmd.
3. Click OK.
Note: To exit from the command prompt, type exit and press Enter.
In the command prompt window type:
telnet <domainname> <Port No>
Press Enter.
Note: To exit out of the Telnet application type Ctrl + ], then type quit.
===============
Opening a command or shell prompt in Linux:
The exact method of doing this varies with the distribution and version of Linux operating system in use.
If you are looking at a graphical screen, the most common method of getting to a shell prompt is to press Ctrl + Alt + F2. You may have to log in.
Note: To logout, type exit and press Enter. To return to the graphical interface, press Alt + F7.
Opening a command or shell prompt in Mac OS:
1. Click Finder.
2. Open the /Applications/Utilities folder by pressing Command + Shift + U.
3. Open the Terminal application.
Note: To exit from Terminal, type exit, press Enter then press Command + Q.
In the terminal, you can type the same command as typed in windows.
===============
http://feeds.feedburner.com/craftmindblog
Total Visit : 315734
Total Hits : 931292
Who's Online : 3